|
ИСТИНА |
Войти в систему Регистрация |
ИСТИНА ПсковГУ |
||
Building Polyacryronitrile Fiber/Epoxy Resin (PANER) Interleaving Film to Strengthen Flexural and Compressive Performances of Laminated CFRP Compositesстатья
- Авторы: Ashfaq S., He J., Lyu Y., Cheng F., Yuan X., Liang X., Shi S., Lomakin E., Bondarchuk D., Tojiyev R.
- Журнал: Nanomaterials
- Том: 15
- Номер: 20
- Год издания: 2025
- Издательство: MDPI
- Местоположение издательства: Basel, Switzerland
- Номер статьи: 1576
- DOI: 10.3390/nano15201576
- Аннотация: Carbon fiber-reinforced polymer (CFRP) composites have excellent mechanical properties, but their performance is hampered by delamination caused by weak interfacial bonding and resin-rich region (RRR). This research has proposed an interleaving film to improve interlaminar structure and mechanical properties by adding polyacrylonitrile (PAN) fiber into the epoxy interlayer of the CFRP laminates. The PAN fiber/epoxy resin (PANER) interleaving film could be prepared, which was beneficial to hinder crack initiation paths and improve the load transfer. Flexural and compression performance testing results showed optimum performance was obtained when 2 wt.% PAN fiber was added, and an increment of 28.6% was obtained in the flexural strength and 11.7% increment in compressive strength. The damaged energy absorption was improved up to 21.4% and 11.3% for the flexural and compressive properties, respectively. The overall thickness increments in the interlayer with PANER interleaving film were approximately 4–9 µm. X-Ray micro-computed tomography and scanning electron microscopy observations exhibited the potential of PAN fiber in the reduction of RRR, resulting in modes replacement from delamination-dominant failure to crossing-multi-layer failure. In all, PANER interleaving film at the interlayer has been confirmed to be an effective approach to produce a simple reinforcement technology for FRP laminates.
- Добавил в систему: Ломакин Евгений Викторович